Описание

Amplifier Unit PNP
Model AP-C40WP
Type Amplifier Unit, PNP
Applicable sensor head AP-41M, AP-41, AP-43, AP-44, AP-48
Set and display range -15 to +110 % of F.S.*1
Display 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s
Repeatability ±0.2 % of F.S.
Operation indicator Red LED x 2 (corresponding to control output 1 and 2)
Display resolution AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa
Power consumption Normal 12 V: 960 mW (80 mA) max., 24 V: 1,400 mW (60 mA) max.
Display temperature characteristic ±1 % of F.S. max.
Hysteresis Variable (Standard: 0.5 % of FS, high-resolution/focus mode: 0.1 % of F.S.)
Response time (Chattering prevention function) 1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)
I/O Analogue output 1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable)
Zero-shift input Input time: 2 ms or more (or analog output selectable)
Control output PNP open collector 100 mA max. (at 30 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption Eco mode 12 V: 660 mW (55 mA) max., 24 V: 1,080 mW (45 mA) max.
Environmental resistance Ambient temperature 0 to +50 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate
Accessories Power supply code (2-m cable with connector), head connector, and unit seal
Weight Approx. 74 g (with 2-m cable)
*1 The focus range applies while in focus mode only.
''